FOLIANT Gemini C 400AFOLIANT Gemini C 400A

FOLIANT Gemini C400A | ref.no. 1636

Manufacturer: Foliant
Full automatic laminating machine for a digital printing lamination.

Description

 

Photogallery:

1636 20161216 131755w 1636 20161216 131816w 1636 20161216 131825w 1636 20161216 131834w 1636 20161216 131907w 1636 20161216 131917w 1636 20161216 131930w 1636 20161216 131946w 1636 20161216 132128w

  • Year production: 2007
  • Condition: very good

The FOLIANT Gemini C 400A is a fully automatic high pressure laminating machine (feeder, laminator and separator) developed for a digital printing machines outputs lamination. The machine is equipped with a pneumatic system of laminating rollers pressure with an easy thrust control. A small compressor is integrated inside the machine frame. The machine has been designed with an operating width of 380 mm and it represents an ideal choice for professional single side lamination in digital shops and all other printing shops, printing and processing sheets up to B3+ size (the largest format is 38 x 58 cm, with a special option even 38 x 66 cm). Maximum speed is up to 15 meters/min.

Machine configuration:

Pile feeder and stacker, jogger, automatic separator, Becker compressor.

Specification:

Maximum speed 15 m / min
Feeding Automatic
Feeding system Vacuum belt
Feeder's load capacity 25 cm
Overlaps control In-Run Screw control
Overlaps accuracy + / - 2 mm
Separation Automatic
Paper weight 115 - 350 g/m2
Main roller pressure Pneumatic
Integrateg compressor Build in, included
Min. sheets size (w x l) 30 x 20 cm
Max. sheets size (w x l) 38 x 58 cm
Max. performance 1800 B3 / h
Temperature control 80 - 140°C
Warming up time 5 min
Power supply 230 V AC, 50-60 Hz
Power 3150 W
Floor space (w x l) 74 x 280 cm
Weight 265 kg
 

The machine’s main feature is pneumatic pressure system in a heavy duty mechanism enabling to achieve a very high working pressure, one single phase 220 – 240 V supply cable, a small integrated compressor inside the machine frame (i.e. no external source of pressured air is required), a nice design and an easy machine operation. The machine is supplied with a modular stand covered with a nicely designed side panels as a standard accessory. An RU 400 Reception Unit and/or a Jogger 400for storing the laminated sheets can be supplied as an option. The machine requires a minimum floor space of 74 x 280 cm.

Feeder

The FOLIANT Gemini C 400A is equipped with a sophisticated vacuum belt rising pile (25 cm) front separation automatic sheet feeder which increases operating comfort and its performance. The feeder is equipped with an „in run“ overlaps control knob, a Becker vacuum pump and a capacitance control sensor. The Becker vacuum pump is used for sheets front airing and for vacuum belt. The overlaps are controlled in an „in-run“ mode. The accuracy is +/- 2 mm under-lap (in a constant speed). The feeder is fitted with a lifting plate with stops and guiders and its capacity is a 25 cm pile of paper.

Laminator

The FOLIANT Gemini C 400A laminator maximum sheet size is 38 x 58 cm. The optional accessory allows laminating sheets of maximum size 38 x 66 cm. The minimum sheet size is 30 x 25 cm (A4). The roll of a film is mounted on an easy handle shaft with a film tension control breaker. The shaft capacity is up to 3000 m of the 24 - 31 microns film. The film holder unit is equipped with a trim slitter and a perforating wheel. The laminating process is done between two laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller. The laminating roller is heated with an infra-red heating spiral, with a sensitive contact temperature sensor. The pressure is pneumatically adjustable to achieve an extra high pressure between the laminating rollers. A small compressor is integrated inside the machine frame.