Komfi Delta 5070

Year : 2000

Condition: top condition, after 100% overhaul

Machine completely overhauled for new parts: new heated cylinder - two-zone el. heating. pressure roller BÖTTCHER ripping and pulling rollers LIGUM Compressor Becker Loading head ADAST Pneumatic valves FESTO Variator TOZ Znojmo Separation - two knives + perforating wheel Spare parts: Becker compressor, ADAST loading head, 2x variator TOZ Znojmo 2x pressure roller BÖTTCHER Technical description laminator DELTA 5070 Naklad is able to load sheets with a minimum format of 20x20 cm and a maximum of 51x 72 cm. The loading height of the stack is 63 cm. It precisely feeds individual sheets of 115-350 g paper with an adjustable overlap of 5-12 mm into its own working space. The laminator is equipped with an electrically heated double-chrome-plated cylinder with a large diameter. The centrally located electronics-controlled panel operator easily sets the speed (continuously adjustable from 0 to 20 m / min), the pressure (hydraulically up to a maximum of 6 ATM. Lower rubber cylinder)and temperature (continuously adjustable from 100 to 140 ° C) The separator is easily programmed in one step. The film with the laminated printing sheets is passed over an adjustable straightening edge, then cut with a rotating knife and enters the tear-off device. Here, the fast-rotating work roll approaches at one point and touches the passing print. This will tear and throw on the output workbench or added shaking unit. The laminated print is ready for further bookbinding immediately after departure. If double-sided lamination is required, the sheets are rotated and the other side can be laminated immediately through the second pass.